Gentoo Wiki


This article is part of the Hardware series.
Laptops TV Tuner Cards Wireless Servers Storage Other Hardware Motherboards Related



Integrated Peripherals

   SATA AHCI Mode              [Enabled]
   SATA Port0-3 Native Mode    [Enabled]
   Onboard SATA/IDE Device     [Enabled]
   Onboard SATA/IDE Ctrl Mode  [AHCI]

Kernel configuration

Applies to 2.6.22-gentoo-r5.

Linux Kernel Configuration: Device Drivers
Device Drivers  --->
    < > ATA/ATAPI/MFM/RLL support --->
    SCSI device support --->
        <*> SCSI disk support
        <*> SCSI CDROM support
        <*> SCSI generic support
    Serial ATA (prod) and Parallel ATA (experimental) drivers --->
        <*> AHCI SATA support
        <*> Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support
        <*> JMicron PATA support   
    Network device support --->
        Ethernet (10 or 100 Mbit) --->
            [ ] Ethernet (10 or 100 Mbit)
        [*] Ethernet (1000 Mbit) --->
            <*> Realtek 8169 gigabit ethernet support
        [ ] Ethernet (10000 Mbit) --->        
    Sound --->
        (ALSA should be built as module as it then allows the use of alsaconf)
        <M> Sound card support 
            Advanced Linux Sound Architecture  --->
                <M> Advanced Linux Sound Architecture
                <M> Sequencer support
                <M> OSS Mixer API
                <M> OSS PCM (digital audio) API 
                PCI devices --->
                    <M> Intel HD Audio
            Open Sound System   --->
                < > Open Sound System (DEPRECATED)

the configuration was tested both with sata disk and old pata disk and cd-rom.


Written by Sopel.


These settings work also on GA-P35T-DQ6 (with 2.6.23-gentoo-r3). Only difference is in BIOS:

   SATA RAID/AHCI Mode      [AHCI]

Greets, pr0

Retrieved from ""

Last modified: Thu, 28 Aug 2008 22:07:00 +0000 Hits: 5,675