Search:  
Gentoo Wiki

HP_Compaq_nx6110

Merge-arrows.gifIt has been suggested that this article be Merged into one article with HOWTO setup HP NX 6110    (Discuss)

This article is still a Stub. You can help Gentoo-Wiki by expanding it.


Please format this article according to the guidelines and Wikification suggestions, then remove this notice {{Wikify}} from the article


This tutorial is esspecialy for HP Compaq nx6110 py493es

Contents

lspci output

 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
 00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
 00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
 00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
 00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
 00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
 02:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
 02:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
 02:0e.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
 03:00.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)

How to setup kernel

uname -a

 Linux ns 2.6.15-rc7 #19 Thu Feb 16 10:03:21 CET 2006 i686 Intel(R) Pentium(R) M processor 1.60GHz GenuineIntel GNU/Linux 

here is my kernel config (2.6.15-rc7)

How to configure xorg-x11

How to setup touchpad

File: /etc/X11/xorg.conf
  Section "InputDevice"

      Identifier        "touchpad"
      Driver    "synaptics"
      Option "Device"      "/dev/input/event1"
 #    Option "Device"      "/dev/input/mouse0" ##Use if /dev/input/event1 wont work for you.
      Option "Protocol"    "auto-dev"
      Option "LeftEdge"    "1700"
      Option "RightEdge"   "5300"
      Option "TopEdge"     "1700"
      Option "BottomEdge"  "4200"
      Option "FingerLow"   "20"
      Option "FingerHigh"  "30"
      Option "MaxTapTime"  "180"
      Option "MaxTapMove"  "220"
      Option "VertScrollDelta" "100"
      Option "MinSpeed"    "0.08"
      Option "MaxSpeed"    "0.18"
      Option "AccelFactor" "0.0010"
      Option "SHMConfig"   "on"
      Option "TapButton2"  "2"
      Option "TapButton1"  "1"

See also the dedicated Synaptics Touchpad guide.

How to setup external mouse

you have to enable usb support in kernel

File: /etc/X11/xorg.conf
   Section "InputDevice"
      Identifier  "usbmouse"
      Driver      "mouse"
      Option      "Protocol"      "ExplorerPS/2"
      Option      "ZAxisMapping"      "4 5"
      Option      "Emulate3Buttons"       "false"
      Option      "Device"        "/dev/input/mice"
   EndSection


Related Links

Retrieved from "http://www.gentoo-wiki.info/HP_Compaq_nx6110"

Last modified: Thu, 28 Aug 2008 20:59:00 +0000 Hits: 9,774