Search:  
Gentoo Wiki

Maxdata_Pro_7000DX/xorg.conf

# **********************************************************************
# Refer to the xorg.conf(5) man page for details about the format of 
# this file.
# **********************************************************************
 
Section "Extensions"
	Option "Composite" "Enable"
EndSection
 
# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
 
# This loads the DBE extension module.
 
    Load        "dbe"  	# Double buffer extension
 
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
      Option    "xfree86-misc"		# wanted by some screensavers - doesnt work
    EndSubSection
 
# This loads the font modules
    Load        "type1"
    Load        "freetype"
#    Load        "xtt"
 
# This loads the GLX module
    Load       "glx"
# This loads the DRI module
    Load       "dri"
 
EndSection
 
# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************
 
Section "Files"
 
# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
 
RgbPath	"/usr/share/X11/rgb"
 
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
 
# aggiunti postumi
    FontPath   "/usr/share/fonts/misc:unscaled"
    FontPath   "/usr/share/fonts/Type1/"
#    FontPath   "/usr/share/fonts/TTF/"
    FontPath   "/usr/share/fonts/corefonts/"
    FontPath   "/usr/share/fonts/sharefonts/"
    FontPath   "/usr/share/fonts/terminus/"
    FontPath   "/usr/share/fonts/ttf-bitstream-vera/"
    FontPath   "/usr/share/fonts/unifont/"
    FontPath   "/usr/share/fonts/artwiz/"
    FontPath   "/usr/share/fonts/freefonts/"
#    FontPath   "/usr/share/fonts/OTF"
    FontPath   "/usr/share/fonts/75dpi:unscaled"
    FontPath   "/usr/share/fonts/100dpi:unscaled"
#    FontPath   "/usr/lib/X11/fonts/local/"
#    FontPath   "/usr/lib/X11/fonts/misc/"
#    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
#    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
#    FontPath   "/usr/lib/X11/fonts/Speedo/"
#    FontPath   "/usr/lib/X11/fonts/Type1/"
#    FontPath   "/usr/lib/X11/fonts/TrueType/"
#    FontPath   "/usr/lib/X11/fonts/freefont/"
#    FontPath   "/usr/lib/X11/fonts/75dpi/"
#    FontPath   "/usr/lib/X11/fonts/100dpi/"
 
# The module search path.  The default path is shown here.
 
    ModulePath "/usr/lib/xorg/modules"
 
EndSection
 
# **********************************************************************
# Server flags section.
# **********************************************************************
 
Section "ServerFlags"
 
# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
 
#    Option "NoTrapSignals"
 
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.
 
#    Option "DontVTSwitch"
 
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
 
#    Option "DontZap"
 
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.
 
#    Option "Dont Zoom"
 
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
 
#    Option "DisableVidModeExtension"
 
# Uncomment this to enable the use of a non-local xvidtune client. 
 
#    Option "AllowNonLocalXvidtune"
 
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings. 
 
#    Option "DisableModInDev"
 
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
 
#    Option "AllowNonLocalModInDev"
 
EndSection
 
# **********************************************************************
# Input devices
# **********************************************************************
 
Section "InputDevice"
 
   Identifier "TouchPad"
 
   Driver "synaptics"	# does not support evdev
 
   Option "SendCoreEvents"
   Option "SHMConfig" "on"
 
Option "LeftEdge" "1900"
Option "RightEdge" "5400"
Option "TopEdge" "1400"
Option "BottomEdge" "4500"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.02"
Option "MaxSpeed" "0.18"
Option "AccelFactor" "0.0010"
 
EndSection
 
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
 
Section "InputDevice"
 
    Identifier	"TheKeyboard"
    Driver	"keyboard"	## does not support evdev
 
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
 
#    Option     "Protocol"      "Xqueue"
 
# was active
#    Option "AutoRepeat" "500 30"
 
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    Option	"Xleds"      "1 2 3"
 
#    Option "LeftAlt"     "Meta"
    Option "RightAlt"    "ModeShift"
 
    Option "XkbRules"	"xorg"
    Option "XkbModel"	"pc105"
    Option "XkbLayout"	"it"
#    Option "XkbVariant"	"nodeadkeys"
 
EndSection
 
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
 
Section "InputDevice"
 
# Identifier and driver
 
    Identifier	"usbmouse"
    Option "SendCoreEvents"
    Driver	"evdev"
    Option "Device"      "/dev/input/event2"
#	Option "Device" "/dev/input/by-id/usb-1241_1177-event-mouse"
#	Option     "Dev Phys"     "usb-*/input0"
EndSection
 
# **********************************************************************
# Monitor section
# **********************************************************************
 
# Any number of monitor sections may be present
 
Section "Monitor"
 
    Identifier  "lcd"
 
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
 
#    HorizSync   85.0
 
#    HorizSync	30-64         # multisync
#    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies
 
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
 
#    VertRefresh 68.7
 
        HorizSync       31-80
#        HorizSync       59.3-85
        VertRefresh     56-76
 
# aggiunte postume
DisplaySize     351 260 # calcolati con xpdyinfo|grep dimension
 
EndSection
 
 
# **********************************************************************
# Graphics device section
# **********************************************************************
 
# Any number of graphics device sections may be present
 
# Standard VGA Device:
 
Section "Device"
    Identifier	"Standard VGA"
    VendorName	"Unknown"
    BoardName	"Unknown"
 
# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.
 
#    Chipset	"generic"
 
# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
 
    Driver     "i810" #"vesa"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.
 
#    BusID      "PCI:0:10:0"
 
#    VideoRam	256
 
#    Clocks	25.2 28.3
 
	Option "DRI" "false"
	Option  "XAANoOffscreenPixmaps" "false"
	Option   "AllowGLXWithComposite"   "false"
	Option   "TripleBuffer"   "false"
 
EndSection
 
# Device configured by xorgconfig:
 
Section "Device"
    Identifier  "Intel i810"
    Driver      "i810"
#    VideoRam    65536	# it is deprecated
    # Insert Clocks lines here if appropriate
 
	Option "DRI" "true"
	Option  "XAANoOffscreenPixmaps" "true"
	Option   "AllowGLXWithComposite"   "true"
	Option   "TripleBuffer"   "true"
EndSection
 
 
# **********************************************************************
# Screen sections
# **********************************************************************
 
# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Default Screen"
    Device      "Intel i810"
    Monitor     "lcd"
    DefaultDepth 24
    Option   "AddARGBGLXVisuals"   "true"
 
    Subsection "Display"
        Depth       8
        Modes       "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection
 
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
 
# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
 
Section "ServerLayout"
 
# The Identifier line must be present
    Identifier  "Default"
 
    Option "AIGLX" "true"
 
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.
 
    Screen "Default Screen"
 
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
 
    InputDevice "usbmouse"
    InputDevice "TouchPad" "CorePointer"
    InputDevice "TheKeyboard" "CoreKeyboard"
 
EndSection
 
Section "Screen"
    Identifier  "Legacy Screen"
    Device      "Standard VGA"
    Monitor     "lcd"
    DefaultDepth 8
    Option   "AddARGBGLXVisuals"   "false"
 
    Subsection "Display"
        Depth       8
        Modes       "800x600"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection
 
## used to play wine games
Section "ServerLayout"
	Identifier "Legacy"
 
	Screen "Legacy Screen"
 
	Option "AIGLX" "false"
	Option "DRI" "false"
	Option "GLX" "false"
 
    InputDevice "usbmouse"
    InputDevice "TouchPad" "CorePointer"
    InputDevice "TheKeyboard" "CoreKeyboard"
 
EndSection
 
Section "DRI"
	Mode 0666
	Group 0
EndSection
Retrieved from "http://www.gentoo-wiki.info/Maxdata_Pro_7000DX/xorg.conf"

Last modified: Thu, 28 Aug 2008 21:52:00 +0000 Hits: 866